Logo
Доставка до: BG

Вход с парола
Статус на поръчката

DT Swiss H 1900 Spline 30 Disc 29 задно колело Boost с 6 дупки движение

вкл. 20% ДДС Безплатна доставка до BGплюс разходи за доставка.

Обемиста стока
Количество
Прибави в количката
Само онлайн и Click & Collect
В момента се предлага в магазин Kronberg
Продукт.-Н-р.
Н-р на продукта от производителя.
Варианти
Номер на артикула на производителя на дисплея
12x148mm Shimano MicroSpline-свободно 41569765 227,50€
Номер на артикула на производителя W0H1900TFD3SA18346
12x148mm SRAM XD-свободно 41569767 227,50€
Номер на артикула на производителя W0H1900TFDNSA18348
Моля избери вариант.

For extended eMTB tours

When motor assistance meets human muscle power, the number of terrains a bike can conquer inevitably increases. The H 1900 Spline is made for exactly this and is now equipped with the proven DT Swiss Ratchet technology. The Ratchet LN system distributes the combined power of the rider and motor over a greater area than the previous ratchet freehub system, increasing the system's robustness through lower peak loads. The 370 hub, combined with reinforced hybrid spokes and a durable aluminum rim with two internal widths, enables full power transmission to the ground.

highlights

  • Wheel specially designed for the needs of E-MTB riders
  • Very stable and wide aluminum tubeless rim, adapted to a higher total weight
  • Robust DT370 hub with ratchet freewheel, also for shifting under load

specification

specification W0H1900TFDSSA18347 W0H1900TFD3SA18346 W0H1900TFDNSA18348
area of application eMTB eMTB eMTB
Type rear wheel rear wheel rear wheel
Suitable for clinchers clinchers clinchers
Tubeless ready Yes Yes Yes
wheel size 29" 29" 29"
axis / installation dimension 12x148mm 12x148mm 12x148mm
brake type disc brake disc brake disc brake
Recording brake disc 6 hole 6 hole 6 hole
Material rim aluminum aluminum aluminum
Rim type / rim profile Hooked / Crotchet tubeless TC / Sleeve Joint Hooked / Crotchet tubeless TC / Sleeve Joint Hooked / Crotchet tubeless TC / Sleeve Joint
rim height 20mm 20mm 20mm
rim width inside 30mm 30mm 30mm
Rim width outside 35mm 35mm 35mm
spoke type DT Hybrid 1 DT Hybrid 1 DT Hybrid 1
lacing Three cross (1:1) Three cross (1:1) Three cross (1:1)
spoke nipples DT Prolock Squorx ProHead Aluminum DT Prolock Squorx ProHead Aluminum DT Prolock Squorx ProHead Aluminum
Compatible with thru axle / quick release thru axle thru axle thru axle
hub DT 370 DT 370 DT 370
hub type Ratchet LN 18 Ratchet LN 18 Ratchet LN 18
freewheel Shimano/SRAM Shimano MicroSpline SRAM XD
Maximum system weight 150kg 150kg 150kg
weight 1192 g 1192 g 1192 g

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

Ratchet LN
Toothed washers instead of pawls. The simultaneous meshing of toothed discs ensures a larger contact area and a more even distribution of the load. The result: Outstanding reliability. The modular design of the hub also allows easy adjustment of the pressure angle and the freewheel body. With the Ratchet LN, DT Swiss ratchet systems can be converted to the Ratchet System. To make this conversion possible, the seal of the freewheel system was attached to the freewheel body and not, as with the other ratchet systems, to the hub shell.

tubeless
All DT Swiss wheels are tubeless ready and the ASM versions are delivered with the tubeless tape and the corresponding valves installed.

per lock
During the Pro Lock process, a two-component adhesive is injected into the nipple thread, which enables the construction of extremely durable wheels. As soon as the nipples are screwed in, the adhesive is activated, which hardens completely at room temperature after approx. 6 - 7 hours. Repeated re-centering is possible without any problems, whereby the adhesive strength decreases slightly with each re-centering.

pressure angle
The pressure angle is the maximum angle that the freewheel body can rotate until the splines of the freewheel body fully mesh and the hub shell accelerates. According to DT Swiss, 36 intervention points represent the best optimization within the three-dimensional perspective in terms of reliability, weight and intervention points, taking into account factors such as suspension, maximum free travel (backlash) and pedal kickback.

warehouse
DT Swiss hubs are engineered to perform optimally once installed on a bicycle. In order to achieve this, the clamping force generated by the wheel fastening system must be taken into account when designing the hub. Optimum turning properties without adjustable bearing play.

scope of delivery

  • 1 x DT Swiss H 1900 Spline 30 Disc rear wheel Boost 6-hole (see item description for details)
  • 1 x tubeless rim tape 32 mm
  • 1 x tubeless valve 32 mm
DT Swiss H 1900 Spline 30 Disc 29 задно колело Boost с 6 дупки 12x148mm  Shimano  MicroSpline-свободно движение
DT Swiss H 1900 Spline 30 Disc 29 задно колело Boost с 6 дупки 12x148mm SRAM XD-свободно движение
За в момента Диаграма на размерите може да бъде предложена само на български

Über die Marke DT Swiss

Ценова аларма!
Намерена грешка? Грешно изображение?
Важат гаранционите права записани в закона.
AJAX Loader Icon