RockShox Solo Air актуализация комплект за Boxxer от модел 2011

Here you will find the service kits for Rock Shox forks.

Service kits have changed over time and depending on the fork in their composition. Earlier it was often separated in damping and suspension, from 2009 about was mostly summarized. With the introduction of Basic and Full Serivce Kits in 2012, dust wipers, foam rings and, if necessary, oil seals were added. As of 2017, the service kits of new Rock Shox products will be named after service time intervals.

Basic service kits contain all seals and parts that are subject to wear (eg dust wipers, air piston seals, piston seal rings) and are therefore completely sufficient for the small service. Full / 200h also contain seals and small parts that are normally not subject to wear (eg seal at the top of the pressure level to the standpipe, valve inserts) and partly the entire sealing head. Please refer to the pictures or the Rock Shox spare parts catalogs for the exact contents of the kits.

• Basic Service Kit
• Full service kit
• 200h / 1 year service kit

Please direct yourself in compatibility issues only after the manufacturer number, not after the possibly incomplete or too general article designations!

Unfortunately we can not keep up with more than 4000 Rock Shox spare parts if a single spare part is suddenly compatible with another fork or that a spare part "for Reba" only fits the first series and not one of the two later ones.

Contact us at info@hibike.de for your questions about Rock Shox parts - we also have a large collection of current and older parts catalogs, oil level documents and service manuals. To identify your fork or damper, it's best to send meaningful photos. Due to the time required we can offer this service only by email and not by phone.

• 1 x Rock Shox suspension fork service kit (see item description for details)

With this upgrade kit you can upgrade your 26 "and 27.5" (650B) Boxxer with 35mm stanchions from 2011 (serial number later than 16T11XXXXXXX) to the current state.

From the serial number 16T11XXXXXXX you can bring your Boxxer 26 "on the SoloAir suspension from the current Boxxer Worldcup, before that an incompatible standpipe was installed.With Bottomless tokens you can fine tune spring characteristic and progression.At the steel spring in Race / RC or Team / R2C2 saves you also weight.

• Complete conversion kit incl. Tokens and small parts
• Fits 26 "Boxxer from 2011 serial number larger 16T11XXXXXXX
• Installation requires disassembly and relubrication of the fork

Please direct yourself in compatibility issues only after the manufacturer number, not after the possibly incomplete or too general article designations!

Unfortunately we can not keep up with more than 4000 Rock Shox spare parts if a single spare part is suddenly compatible with another fork or that a spare part "for Reba" only fits the first series and not one of the two later ones.

Contact us at info@hibike.de for your questions about Rock Shox parts - we also have a large collection of current and older parts catalogs, oil level documents and service manuals. To identify your fork or damper, it's best to send meaningful photos. Due to the time required we can offer this service only by email and not by phone.

Solo Air ™
Solo Air is like a Buddhist monk. Due to the enlightened design, the positive and negative air chambers of your suspension forks can be filled with air via just one car valve. So there is a perfect balance between them, like yin and yang. For a comfortable and predictable ride, you can set the lightest suspension fork on the market in seconds.

• 1 x Rock Shox Solo Air Upgrade Kit for Boxxer (2011-2016 from 16T11xxxxxx) (see item description for details)