Logo
Доставка до: BG

Вход с парола
Статус на поръчката

DT Swiss HXC 1501 Spline 30 Disc 27.5 задно колело Boost с 6 дупки 12x148mm SRAM XD-свободно движение

вкл. 20% ДДС Безплатна доставка до BGплюс разходи за доставка.

Обемиста стока
Количество
Прибави в количката
Само онлайн и Click & Collect
В момента се предлага в магазин Kronberg
Продукт.-Н-р.
Н-р на продукта от производителя.
Варианти
Номер на артикула на производителя на дисплея
DT Swiss HXC 1501 Spline 30 Disc 27.5 задно колело Boost с 6 дупки 12x148mm SRAM XD-свободно движение 41569819 667,36€
Номер на артикула на производителя WHXC150THDNCA18284
Моля избери вариант.

Carbon wheelset with high-end technology

Built for extended eMTB adventures.

Developed for riders looking for the ultimate in eMTB wheelset performance. Newly equipped with a carbon rim, the HXC 1501 Spline One is the top hybrid wheel in the DT Swiss range. The carbon rim is combined with a newly designed hub shell that offers better resistance to drive and braking torques, which are higher in modern eMTBs. With the new Ratchet EXP OS system with 30 teeth, the torque generated by the motor and driver is transmitted directly from the pedals to the ground. This transmission is made possible by reinforced spokes, so that even greater accelerations can be generated than with the earlier hybrid product range. Every component has been carefully developed, produced and tested to guarantee a stress-free ride and fun, regardless of the level of the driver.

Highlights

  • Wide, light and hookless carbon rim
  • Tubeless ready
  • Modern hub with better resistance to drive and braking torques on e-bikes
  • More direct power transmission through the Ratchet EXP OS freewheel system with 30-fold toothing

specification

specification WHXC150THDSCA19977 WHXC150THD3CA18283 WHXC150THDNCA18284
Area of application eMTB eMTB eMTB
Type Rear wheel Rear wheel Rear wheel
Suitable for Clincher Clincher Clincher
Tubeless ready Yes Yes Yes
Impeller size 27.5 " 27.5 " 27.5 "
Axis / installation dimension 12 x 148 mm 12 x 148 mm 12 x 148 mm
Brake type Disc brake Disc brake Disc brake
Brake disc mount 6-hole 6-hole 6-hole
Material rim Carbon Carbon Carbon
Rim type / rim profile Hookless tubeless TSS Hookless tubeless TSS Hookless tubeless TSS
Rim height 25 mm 25 mm 25 mm
Inner rim width 30 mm 30 mm 30 mm
Outside rim width 36 mm 36 mm 36 mm
Spoke type DT Hybrid 2 DT Hybrid 2 DT Hybrid 2
Lacing Three-cross (1: 1) Three-cross (1: 1) Three-cross (1: 1)
Spoke nipples DT Prolock Squorx ProHead aluminum DT Prolock Squorx ProHead aluminum DT Prolock Squorx ProHead aluminum
Compatible with thru axle / quick release Thru axle Thru axle Thru axle
hub DT 240 DT 240 DT 240
Hub type Ratchet EXP OS 30 Ratchet EXP OS 30 Ratchet EXP OS 30
Freewheel Shimano / SRAM Shimano MicroSpline SRAM XD
Maximum system weight 140 kg 140 kg 140 kg
Weight 1004 g 1004 g 1004 g

Technologies used

In this chapter we explain the technologies that the manufacturer uses for this product.

Ratchet EXP OS
By using a single cylinder spring, there is less system wear, while a more complete meshing is made possible. With a full mesh of 30T, the power generated by the engine and driver is transmitted evenly over a wide contact area, resulting in superior reliability. A larger double thread distributes the loads over a larger area and thus reduces peak loads. This increases the service life of the system and even enables a higher torque to be transmitted. Larger bearings with larger balls rotate quickly and absorb the additional axial and radial forces of the eMTB better. The axle was tested in FEM analyzes in order to determine the bending load when driving an eMTB and to optimize the axle resistance.

Tubeless
All DT Swiss wheels are tubeless ready and the ASM versions are supplied with the tubeless tape and the corresponding valves fitted.

Pro lock
In the Pro Lock process, a two-component adhesive is injected into the nipple thread, which enables extremely durable impellers to be built. As soon as the nipples are screwed in, the adhesive is activated, which hardens completely after approx. 6 - 7 hours at room temperature. Repeated re-centering is possible without any problems, whereby the adhesive force decreases slightly with each re-centering.

Pressure angle
The pressure angle is the largest possible angle that the freewheel body can turn until the teeth of the freewheel body completely mesh and the hub shell is accelerated. In the opinion of DT Swiss, 36 intervention points represent the best optimization within the three-dimensional perspective in terms of reliability, weight and intervention points, taking into account factors such as suspension, maximum free travel (backlash) and pedal kickback.

warehouse
DT Swiss hubs are designed in such a way that they function optimally once they are installed in a bicycle. In order to achieve this, the clamping force created by the wheel fastening system must be taken into account when designing the hub. Optimal turning properties without adjustable bearing play.

scope of delivery

  • 1 x DT Swiss HXC 1501 Spline 30mm 27.5 "Disc rear wheel Boost 6-hole (see item description for details)
  • 1 x tubeless rim tape 32 mm
  • 1 x tubeless valve 18-25 mm
За в момента Диаграма на размерите може да бъде предложена само на български

Über die Marke DT Swiss

За в момента Информация за групата артикули може да бъде предложена само на български
Ценова аларма!
Намерена грешка? Грешно изображение?
Важат гаранционите права записани в закона.
AJAX Loader Icon